SPS-450 Series

No.6349 1/5

Ordering number : ENN6349

SPS-450 Series

Receiver Pre-amp Module for

Infrared Remote Control

D2099 GI, (MI)

Features

• This is an unified module consisting of a PIN photodiode and receiver pre-amp IC.

It is a compact type, not necessary to mount outer part, and provides low voltage and low power consumption.

• It also puts a measure to inverter fluorescent lamp with a high frequency trap circuit for band-pass filter.

• It has leads at the both sides, so it is easy to put it on PCB.

Absolute Maximum Ratings at Ta=25

Parameter

Symbol

Rating

Unit

Line Voltage

VCC

0 to +6.3

V

Power Dissipation

PD

100

mW

Operating Temperature

Topr

--10 to +60

°C

Storage Temperature

Tstg

--20 to +70

°C

Soldering Temperature

Tsol

°C

Recommended Operating Condition at Ta=25

Parameter

Symbol

Opr. Condition

Unit

Line Voltage

VCC

+4.7 to +5.3

V

We recommend the signal format with leader code (for example ; NEC format or Home Electrical Appliances Society

format in Japan) for the remote control transmitter.

Electrical / Optical Characteristics at Ta=25

Parameter

Symbol

Condition

Min.

Typ.

Max.

Unit

Consumption Current

Non-signal input

--

1.4

2.2

mA

7.5

10.0

--

m

Cone with its limit

Controlling Distance

L

inclined at 30 deg to axis

5.0

--

--

m

Cone with its limit

inclined at 40 deg to axis

3.0

--

--

m

Low-level Output Voltage

--

--

0.5

V

High-level Output Voltage

4.5

--

--

V

Low-level Pulse Width

interval of output at the

300

610

900

µs

point of 30cm and 7.5m on axis

High-level Pulse Width

interval of output at the

300

590

900

µs

point of 30cm and 7.5m on axis

Carrier Wave Frequency

fo

--

--

--

kHz

*3

Carrier wave frequency (fo) differs every a type. Refer to the following list.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN