Everlight Electronics Co., Ltd.

http:\\www.everlight.com

Document No: DAS-020-005 Rev1.1

Dec. 31, 2007

7

3mm DIP

Ambient Light Sensor

ALS-PT204-6C/L177

Recommended method of storage

Reflow Terms:

JEDEC Level 4 Specification

Dry box storage is recommended as soon as the aluminum bag has been opened prevent

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift might cause

big current happen. (Burned-out might happen).

2. Storage

(1) Do not open moisture proof bag before components are ready to use.

(2) Before opening moisture proof bag, components should be kept at 30

℃ or less and

90%RH or less.

(3) Components should be used within a year.

(4) After opened moisture proof bag, components should be kept at 30

℃ or less and

70%RH or less.

(5) Components should be used within 168 hours after opened moisture proof bag.

(6) If the moisture absorbent material (silica gel) has faded away or the components

have exceeded the storage time, baking treatment should be performed using the

following conditions. (Baking treatment: 60±5

℃ for 24 hours)

ESD Precaution:

Proper storage and handing procedures should be followed to prevent ESD damage to

the devices especially when they are removed from the Anti-static bag. Electro-Static

Sensitive Devices warning labels are on the packing.