 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
USB2513-HZH Datasheet(PDF) 9 Page - SMSC Corporation |
|
||||||||||||||||||||||||||||||
USB2513-HZH Datasheet(HTML) 9 Page - SMSC Corporation |
|
|
9 / 48 page  USB 2.0 High-Speed 3-Port Hub Controller Datasheet SMSC USB2513 9 Revision 1.98 (11-19-07) DATASHEET Chapter 3 Pin Descriptions 3.1 PIN Descriptions This section provides a detailed description of each signal. The signals are arranged in functional groups according to their associated interface. The “N” symbol in the signal name indicates that the active, or asserted, state occurs when the signal is at a low voltage level. When “N” is not present before the signal name, the signal is asserted when at the high voltage level. The terms assertion and negation are used exclusively. This is done to avoid confusion when working with a mixture of “active low” and “active high” signals. The term assert, or assertion, indicates that a signal is active, independent of whether that level is represented by a high or low voltage. The term negate, or negation, indicates that a signal is inactive. Table 3.1 USB2514 Pin Descriptions SYMBOL 36 QFN 48 QFN BUFFER TYPE DESCRIPTION UPSTREAM USB INTERFACES USBUP_DP USBUP_DM 31 30 43 42 IO-U USB Bus Data These pins connect to the upstream USB bus data signals (Host port, or upstream hub). VBUS_DET 27 35 I/O12 Detect Upstream VBUS Power Detects state of Upstream VBUS power. The SMSC Hub monitors VBUS_DET to determine when to assert the internal D+ pull-up resistor (signaling a connect event). When designing a detachable hub, this pin must be connected to the VBUS power pin of the USB port that is upstream of the hub. For self-powered applications with a permanently attached host, this pin must be connected to 3.3V (typically VDD33). DOWNSTREAM 3-PORT USB 2.0 INTERFACE USBDN_DP[3:1]/ PRT_DIS_P[3:1] & USBDN_DM[3:1]/ PRT_DIS_M[3:1] 7 4 2 7 4 2 IO-U High-Speed USB Data & Port Disable Strap Option These pins connect to the downstream USB peripheral devices attached to the hub’s port. 6 3 1 6 3 1 Downstream Port Disable Strap option: If this strap is enabled by package and configuration settings (see Table 3.2), this pin will be sampled at RESET_N negation to determine if the port is disabled. Both USB data pins for the corresponding port must be tied to the VDDA33 to disable the associated downstream port. PRTPWR[3:1] 18 16 12 21 19 15 O12 USB Power Enable Enables power to USB peripheral devices downstream. The active signal level of the PRTPWR[3:1] pins is determined by the Power Polarity Strapping function of the PRTPWR_POL pin. |
Similar Part No. - USB2513-HZH |
|
Similar Description - USB2513-HZH |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
