M25PE20-VMP6TP datasheet(9/64 Pages) NUMONYX

Part #	M25PE20-VMP6TP

Description	1 and 2 Mbit, page-erasable serial Flash memories with byte alterability, 75 MHz SPI bus, standard pinout

Download	64 Pages

Scroll/Zoom	100%

Manufacturer	NUMONYX [Numonyx B.V]

Direct Link	http://www.numonyx.com

Logo

9 / 64 page

M25PE20, M25PE10

Signal descriptions

9/64

2.7

Write Protect (W) or Top Sector Lock (TSL)

●

The Write Protect function is available in the T9HX process only (see Important

note on page 6)

The Write Protect (W) input is used to freeze the size of the area of memory that is

protected against write, program and erase instructions (as specified by the values in

the BP1 and BP0 bits of the Status Register. See Section 6.4: Read Status Register

(RDSR) for a description of these bits.

●

The Top Sector Lock function is available in the T7X process only (see Important

note on page 6)

The input signal sets the device in the Hardware Protected mode, when Top Sector

Lock (TSL) is connected to VSS, causing the top 256 pages (upper addresses) of the

memory to become read-only (protected from write, program and erase operations).

When Top Sector Lock (TSL) is connected to VCC, the top 256 pages of memory

behave like the other pages of memory.

2.8

VCC supply voltage

VCC is the supply voltage.

2.9

VSS ground

VSS is the reference for the VCC supply voltage.

Similar Part No. - M25PE20-VMP6TP

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	M25PE20-VMP6TP	480Kb / 37P	1 and 2 Mbit, Low Voltage, Page-Erasable Serial Flash Memories with Byte-Alterability, 33 MHz SPI Bus, Standard Pin-out
STMicroelectronics	M25PE20-VMP6TP	482Kb / 60P	1 and 2 Mbit, low voltage, Page-Erasable Serial Flash memories with Byte-Alterability, 50 MHz SPI bus, standard pinout

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	M25PE20	482Kb / 60P	1 and 2 Mbit, low voltage, Page-Erasable Serial Flash memories with Byte-Alterability, 50 MHz SPI bus, standard pinout
Numonyx B.V	M25PE16	1Mb / 58P	16-Mbit, page-erasable serial flash memory with byte-alterability, 75 MHz SPI bus, standard pinout
	M25PE80	1Mb / 66P	8-Mbit, page-erasable serial flash memory with byte alterability, 75 MHz SPI bus, standard pinout
	M25PE40	1Mb / 62P	4 Mbit, page-erasable serial Flash memory with byte alterability, 75 MHz SPI bus, standard pinout
	M45PE10	990Kb / 47P	1-Mbit, page-erasable serial flash memory with byte-alterability and 75 MHz SPI bus interface
STMicroelectronics	M25PE20	480Kb / 37P	1 and 2 Mbit, Low Voltage, Page-Erasable Serial Flash Memories with Byte-Alterability, 33 MHz SPI Bus, Standard Pin-out
	M25PE16	492Kb / 56P	16 Mbit, low-voltage, Page-Erasable Serial Flash memory with byte-alterability, 50 MHz SPI bus, standard pinout
	M25PE40	482Kb / 60P	4 Mbit, low voltage, Page-Erasable Serial Flash memory with byte alterability, 50 MHz SPI bus, standard pinout
	M25PE80	507Kb / 61P	8 Mbit, low-voltage, Page-Erasable Serial Flash memory with Byte alterability, 50MHz SPI bus, standard pinout
	M45PE20	427Kb / 35P	2 Mbit, Low Voltage, Page-Erasable Serial Flash Memory With Byte-Alterability and a 25 MHz SPI Bus Interface