Dual-channel HOTLink II™ Transceiver
CYW15G0201DXB
CYV15G0201DXB
CYP15G0201DXB
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose
, CA 95134
•
408-943-2600
Document #: 38-02058 Rev. *H
Revised March 25, 2005
Features
• Second-generation HOTLink® technology
• Compliant to multiple standards
— ESCON, DVB-ASI, Fibre Channel and Gigabit
Ethernet (IEEE802.3z)
— CPRI™ compliant
— CYW15G0201DXB compliant to OBSAI-RP3
— CYV15G0201DXB compliant to SMPTE 259M and
SMPTE 292M
— 8B/10B encoded or 10-bit unencoded data
• Dual channel transceiver operates from 195 to
1500 MBaud serial data rate
— CYW15G0201DXB operates from 195 to 1540 MBaud
serial data rate
— Aggregate throughput of 6 GBits/second
• Selectable parity check/generate
• Selectable dual-channel bonding option
— One 16-bit channels
• Skew alignment support for multiple bytes of offset
• Selectable input/output clocking options
• MultiFrame™ Receive Framer
— Bit and Byte alignment
— Comma or full K28.5 detect
— Single- or multi-byte framer for byte alignment
— Low-latency option
• Synchronous LVTTL parallel interface
• Internal phase-locked loops (PLLs) with no external
PLL components
• Optional Phase-Align Buffer in transmit path
• Optional Elasticity Buffer in receive path
• Dual differential PECL-compatible serial inputs per
channel
— Internal DC-restoration
• Dual differential PECL-compatible serial outputs per
channel
— Source matched for 50
Ω transmission lines
— No external bias resistors required
— Signaling-rate controlled edge-rates
• Compatible with
— Fiber-optic modules
— Copper cables
— Circuit board traces
• JTAG boundary scan
• Built-In Self-Test (BIST) for at-speed link testing
• Per-channel Link Quality Indicator
— Analog signal detect
— Digital signal detect
• Low power 1.8W @ 3.3V typical
• Single 3.3V supply
• 196-ball BGA
• Pb-Free package option available
• 0.25
µ BiCMOS technology
Functional Description
The CYP(V)15G0201DXB[1] Dual-channel HOTLink II™
Transceiver is a point-to-point or point-to-multipoint communi-
cations building block allowing the transfer of data over
high-speed serial links (optical fiber, balanced, and unbal-
anced copper transmission lines) at signaling speeds ranging
from 195- to 1500-MBaud per serial link.
The CYV15G0201DXB satisfies the SMPTE 259M and
SMPTE 292M compliance as per the EG34-1999 Pathological
Test Requirements.
Note:
1.
CYV15G0201DXB refers to SMPTE 259M and SMPTE 292M compliant devices. CYW15G0201DXB refers to OBSAI RP3 compliant devices (maximum
operating data rate is 1540 MBaud). CYP15G0201DXB refers to devices not compliant to SMPTE 259M and SMPTE 292M pathological test requirements and
also OBSAI RP3 operating datarate of 1536 MBaud. CYP(V)(W)15G0201DXB refers to all three devices.
Figure 1. HOTLink II™ System Connections
10
10
10
10
10
10
10
10
Serial Links
Serial Links
Backplane or
Cabled
Connections
