Electronic Components Datasheet Search |
|
730P154X9250 Datasheet(PDF) 1 Page - Vishay Siliconix |
|
730P154X9250 Datasheet(HTML) 1 Page - Vishay Siliconix |
1 / 4 page Document Number: 42029 For technical questions, contact: spresale@vishay.com www.vishay.com Revision: 07-Feb-07 25 Type 730P Vishay Sprague Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene Not for New Design FEATURES • Excellent AC performance • Low Power dissipation • Low dielectric absorption • Close tolerance • High stability PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C Voltage derating: At + 105 °C, 50 % of + 85 °C rating ESR: 20 kHz to 100 kHz Capacitance Range: 0.022 µF to 10.0 µF Capactiance Tolerance: ± 20 %, ± 10 %, ± 5 % DC Voltage Rating: 100 WVDC to 630 WVDC AC Voltage Rating: 70 Vrms to 275 Vrms, 60 Hz to 400 Hz Dissipation Factor: 0.1 % maximum Measure all units at 1000 Hz at + 25 °C DC Voltage Test: 200 % of rated voltage for 2 minutes AC Voltage Test: 130 % of rated rms voltage at 60 Hz for 15 seconds Insulation Resistance: Measured at 100 WVDC after a 2 minute charge. At + 25 °C: 200 000 Megohm - Microfarads or 400 000 Megohm minimum. At + 85 °C: 10 000 Megohm - Microfarads or 20 000 Megohm minimum. At + 105 °C: 1000 Megohm - Microfarads or 2000 Megohm minimum. Vibration Test (Condition B): No mechanical damage, short, open or intermittent circuits. DC Life Test: 150 % of rated voltage for 1000 hours at + 85 °C. No open or short circuits. No visible damage. Maximum Δ CAP ± 1.0 % Minimum IR = 50 % of initial limit Maximum DF = 0.12 % Humidity Test: 95 % relative humidity at + 40 °C for 250 hours. No visible damage. Maximum Δ CAP ± 1.0 % Minimum IR = 20 % of initial limit Maximum DF = 0.12 % AC Life Test: 110 % of rated rms voltage at 60 Hz for 1000 hours at + 85 °C. Maximum Δ CAP ± 5 % Minimum IR = 50 % of initial limit Maximum DF = 0.12 % PHYSICAL CHARACTERISTICS Lead Pull: 5 pounds (2.3 kilograms) for one minute. No physical damage. Lead Bend: After three complete consecutive bends. No damage. Marking: Sprague® trademark, type or part number, capacitance and voltage. * Leads to be within 0.062" [1.57 mm] of center line at egrees but not less than 0.031" [0.79 mm] from edge. DIMENSIONS in inches [millimeters] L ± 0.062 [1.57] 1.750 [44.45] Min. Solid Tinned Wire 0.032 [0.81] Nominal Dia. (No. 20 AWG) 1.750 [44.45] Min. D Max. |
Similar Part No. - 730P154X9250 |
|
Similar Description - 730P154X9250 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |