2 / 2 page
Thermoelectric Cooler
MI2021T
Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0016, Rev E
Performance Curves
Environment: One atmosphere dry nitrogen
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
(WATTS)
LOAD
HEAT
Q=0
100.0
80.0
60.0
40.0
20.0
0.0
CURRENT (AMPS)
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
2.0
1.6
1.2
0.8
0.4
0.0
0.60
0.50
0.40
0.30
0.20
0.10
0.00
(WATTS)
LOAD
HEAT
Q=0
100.0
80.0
60.0
40.0
20.0
0.0
CURRENT (AMPS)
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
2.0
1.6
1.2
0.8
0.4
0.0
0.70
0.80
0.80
0.90
Hot Side Temperature: 27°C
Hot Side Temperature: 50°C
T=0
T=0
For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, consult one of our
Applications Engineers.
Installation
Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional
information, please refer to our TEC Installation Guide.
Operation Cautions
For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To
minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method.
Marlow Industries, Inc.
10451 Vista Park Road
Dallas Texas 75238-1645
TEL: 214-340-4900
FAX: 214-341-5212
Internet: http://www.marlow.com
Marlow Industries Europe
Aberdeen House, South Road
Haywards Heath
West Sussex RH164NG UK
TEL: +44 (0)1444-443404
FAX: +44 (0)1444-443334
Marlow Industries Asia
1-1-8-401
Uehara, Shibuya-ku
Tokyo, Japan 151-0064
TEL: +81 (3) 5454-5280
FAX: +81 (3) 5454-5281