TMP93PW46A

2004-02-10

93PW46A-1

Low Voltage/Low Power

CMOS 16-Bit Microcontroller

TMP93PW46AF

1.

Outline and Device Characteristics

The TMP93PW46A is OTP type MCU which includes 128-Kbyte One-time PROM. Using the

adapter-socket, you can write and verify the data for the TMP93CW46A by general EPROM

programmer.

The TMP93PW46A has the same pin-assignment as the TMP93CW46A (Mask ROM type).

Writing the program to built-in PROM, the TMP93PW46A operates as the same way as the

TMP93CW46A.

Figure 1.1 Memory map of TMP93CW46A/TMP93PW46A

MCU

ROM

RAM

Package

Adapter Socket

TMP93PW46AF

OTP 128 Kbytes

4 Kbytes

P-LQFP100-1414-0.50F

BM11129

= Internal area

000000H

000080H

Internal I/O

001080H

FFFF00H

008000H

FFFFFFH

Internal RAM

External area

Internal ROM

(128 Kbytes)

External area

Reserved

028000H

• The information contained herein is subject to change without notice.

• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by

TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by

implication or otherwise under any patent or patent rights of TOSHIBA or others.

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general

can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer,

when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid

situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to

property.

In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most

recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for

Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..

• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal

equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are

neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor

failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control

instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,

medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made

at the customer’s own risk.

• The products described in this document are subject to the foreign exchange and foreign trade laws.

• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law

and regulations.

• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality

and Reliability Assurance/Handling Precautions.

030619EBP1