YB1210 – 300mA

Ultra-Low-Noise, High PSRR LDO Regulator

YB1210 MRev.1.5

www.yobon.com.tw

11

SOT-23 Package Information

NOTE:

1. ALL DIMENSIONS ARE IN MILLIMETERS.

2. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSION OR GATE BURRS SHALL NOT

EXCEED 0.25mm PER END.

DIMENSION E1 DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD

FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 PER SIDE.

3. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE

BOTTOM.

DIMENSIONS D AND E1 ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE

PLASTIC BODY EXCLUSIVE OF MOLD FLASH, THE BAR BURRS. GATE BURRS AND

INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETEEN THE TOP AND BOTTOM OF

THE PLASTIC BODY..

4. DIMENSION“b”

5. DOES NOT INCLUDE DAMBAR PROTRUSION.

ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08mm

TOTAL IN EXCESS OF THE “b”DIMENSION AT MAXIMUM

MATERIAL CONDITION. THE DAMBAR CANNOT BE LOCATED

ON THE LOWER RADIUS OF THE FOOT . MINMUM SPACE BETWEEN

PROTRUSION AND AN ADJACENT LEAD SHALL NOT BE LESS

THAN 0.07mm

5. LEAD FRAME MATERIAL:EFTEC 64T