Electronic Components Datasheet Search |
|
RT9205 Datasheet(PDF) 5 Page - Richtek Technology Corporation |
|
RT9205 Datasheet(HTML) 5 Page - Richtek Technology Corporation |
5 / 15 page RT9205/A Preliminary 5 DS9205/A-08 March 2007 www.richtek.com Functional Pin Description LGATE (Pin 1) Connect the LGATE pin to the gate of lower MOSFET. This pin provides the gate drive for the lower MOSFET. PGND/GND (Pin 2, 3) Signal and power ground for the IC. All voltage levels are measured with respect to this pin. VCC (Pin 4) This is the main bias supply for the RT9205/A. This pin also provides the gate bias charge for the gate of lower MOSFET. The voltage at this pin is monitored for ensuring a proper power-on reset (POR). This pin is also the out of an internal 6.0V regulator that powered from the BOOT pin when the BOOT pin is directly powered from ATX 12V. DRV (Pin 5) This pin is the output of a linear controller. It should be connected to the base of an external bypass NPN transistor or the gate of a N-MOSFET to form a linear low dropout regulator. FBL (Pin 6) This pin is connected to the output resistor-divider of an external power transistor or a N-MOSFET based low dropout regulator for regulating and monitoring the output voltage. This pin is also connected to the protection monitor and the invertering input of error amplifier of internal linear regulator inside the IC. FB (Pin 9) This pin is connected to the PWM converter's output-divider for regulating and monitoring the output voltage of buck converter. This pin also connects to the protection monitor and the inverting input of internal PWM error amplifier inside the IC. BOOT (Pin 13) This pin provides ground referenced bias voltage to the upper MOSFET driver. A bootstrap circuit is used to create a voltage that is suitable for driving a logic-level N-MOSFET when operating at a single 5V power supply. This pin also could be powered from ATX 12V, in this situation, an internal 6.0V regulator will supply to VCC pin for generating bias required inside the IC. UGATE (Pin 14) Connect the UGATE pin to the gate of upper MOSFET. This pin provides the gate drive for the upper MOSFET. NC (Pin 7,8,10,11,12) No Connection. |
Similar Part No. - RT9205 |
|
Similar Description - RT9205 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |