RT9173C

5

DS9173C-12

September 2007

www.richtek.com

Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for

stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the

operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended

periods may remain possibility to affect device reliability.

Note 2. Devices are ESD sensitive. Handling precaution recommended.

Note 3. The device is not guaranteed to function outside its operating conditions.

Note 4.

2S2P) of JEDEC 51-7 thermal measurement standard. The case point of

Pad) package.

Note 6. Regulation is measured at constant junction temperature by using a 5ms current pulse. Devices are tested for load

regulation in the load range from 0A to 2A.

Note 7. Standby current is the input current drawn by a regulator when the output voltage is disabled by a shutdown signal on