VOIDLESS HERMITICALLY SEALED

SURFACE MOUNT STANDARD

RECOVERY GLASS RECTIFIERS

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 2

Copyright

© 2006

11-27-2006 REV B

S C O T TS DALE DIVISION

1N5550US thru 1N5554US

SYMBOLS & DEFINITIONS

Symbol

Definition

Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.

Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating

temperature range excluding all transient voltages (ref JESD282-B).

Average Rectified Output Current: Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave

input and a 180 degree conduction angle

Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.

Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and

temperature.

Reverse Recovery Time: The time interval between the instant the current passes through zero when

changing from the forward direction to the reverse direction and then a specified recovery decay point after a

peak reverse current occurs.

PACKAGE DIMENSIONS AND PAD LAYOUT

NOTE: This Package Outline has also previously

PAD LAYOUT

been identified as “D-5B”

INCHES

mm

A

0.288

7.32

B

0.070

1.78

C

0.155

3.94

Note: If mounting requires adhesive

separate from the solder, an additional

0.080 inch diameter contact may be

placed in the center between the pads

as an optional spot for cement.

INCHES

mm

MIN

MAX

MIN

MAX

BL

.205

.225

5.21

5.72

BD

.137

.142

3.48

3.61

ECT

.019

.028

0.48

0.711

S

.003

---

0.08

---