 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
SP526 Datasheet(PDF) 2 Page - Sipex Corporation |
|
||||||||||||||||||||||||||||||
SP526 Datasheet(HTML) 2 Page - Sipex Corporation |
|
|
2 / 24 page  2 Rev: C Date:2/1/06 SP526 Multi–Mode Serial Transceiver © Copyright 2006 Sipex Corporation - T A = +25°C and VCC = +4.75V to +5.25V unless otherwise noted. PARAMETER MIN. TYP. MAX. UNITS CONDITIONS LOGIC INPUTS V IL 0.8 Volts V IH 2.0 Volts LOGIC OUTPUTS V OL 0.4 Volts I OUT= – 3.2mA V OH 2.4 Volts I OUT= 1.0mA V.28 DRIVER DC Parameters Outputs Open Circuit Voltage ±15 Volts per Figure 1 Loaded Voltage ±5.0 ±15 Volts per Figure 2 Short-Circuit Current ±100 mA per Figure 4 Power-Off Impedance 300 Ω per Figure 5 AC Parameters V CC = +5V for AC parameters Outputs Transition Time 1.5 µs per Figure 6; +3V to -3V Instantaneous Slew Rate 30 V/µs per Figure 3 Propagation Delay t PHL 0.5 1 5 µs t PLH 0.5 1 5 µs Max.Transmission Rate 120 230 kbps V.28 RECEIVER DC Parameters Inputs Input Impedance 3 7 kΩ per Figure 7 Open-Circuit Bias +2.0 Volts per Figure 8 HIGH Threshold 1.7 3.0 Volts LOW Threshold 0.8 1.2 Volts AC Parameters V CC = +5V for AC parameters Propagation Delay t PHL 50 100 500 ns t PLH 50 100 500 ns ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. V CC............................................................................+7V Input Voltages: Logic...............................-0.3V to (V CC+0.5V) Drivers............................-0.3V to (V CC+0.5V) Receivers........................................±15.5V Output Voltages: Logic................................-0.3V to (V CC+0.5V) Drivers................................................±15V Receivers........................-0.3V to (V CC+0.5V) Storage Temperature..........................-65˚C to +150˚C Power Dissipation (derate 14.3mW/˚C above 70˚C)................1144mW STORAGE CONSIDERATIONS Due to the relatively large package size of the 44-pin quad flat-pack, storage in a low humidity environment is preferred. Large high density plastic packages are moisture sensitive and should be stored in Dry Vapor Barrier Bags. Prior to usage, the parts should remain bagged and stored below 40°C and 60%RH. If the parts are removed from the bag, they should be used within 48 hours or stored in an environment at or below 20%RH. If the above conditions cannot be followed, the parts should be baked for four hours at 125°C in order remove moisture prior to soldering. Sipex ships the 44-pin QFP in Dry Vapor Barrier Bags with a humidity indicator card and desiccant pack. The humidity indicator should be below 30%RH. ELECTRICAL CHARACTERISTICS |
Similar Part No. - SP526_06 |
|
Similar Description - SP526_06 |
|
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
