In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in

this bulletin supplements that in the catalog.

Electrical Parameters

As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements based on

room temperature (25°C) parameters:

•

Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range

•

Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000

megohm microfarads or 100 gigohms, whichever is less.

•

Capacitance and Dissipation Factor (DF) measured at 1KHz at 1.0Vrms.

25 Volts - DF Limit is 3.5%

Soldering Process

Wave soldering or reflow soldering is acceptable for these chips.

Marking

These chips are normally supplied unmarked. If required, they can be laser marked as an extra cost option.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6682 • www.kemet.com