2SD2600

No.8564-3/3

0

50

40

30

20

10

20

060

40

80

100

140

120

160

PC -- Tc

IT03409

100ms

1.0

5

2

2

3

5

2

3

5

2

3

10

0.1

10

25

37

2

2

5

37

100

1ms to 100ms : Single pulse

ICP=12A

IC=8A

IT03408

Tc=25

°C

A S O

Collector-to-Emitter Voltage, VCE -- V

Case Temperature, Tc --

°C

0.1

7

23

5

1.0

7

23

5

10

10

5

3

2

1.0

5

3

7

7

0.1

7

23

5

1.0

7

23

5

10

10

5

3

2

1.0

5

7

7

VCE(sat) -- IC

25

°C

IC / IB=500

Ta= --40°C

IT03406

25°C

IC / IB=500

120°C

VBE(sat) -- IC

IT03407

Ta= --40

°C

Collector Current, IC -- A

Collector Current, IC -- A

Specifications of any and all SANYO Semiconductor products described or contained herein stipulate

the performance, characteristics, and functions of the described products in the independent state,

and are not guarantees of the performance, characteristics, and functions of the described products

as mounted in the customer's products or equipment. To verify symptoms and states that cannot be

evaluated in an independent device, the customer should always evaluate and test devices mounted

in the customer's products or equipment.

SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any

and all semiconductor products fail with some probability. It is possible that these probabilistic failures

could give rise to accidents or events that could endanger human lives, that could give rise to smoke or

fire, or that could cause damage to other property. When designing equipment, adopt safety measures

so that these kinds of accidents or events cannot occur. Such measures include but are not limited to

protective circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO Semiconductor products (including technical data,services) described

or contained herein are controlled under any of applicable local export control laws and regulations, such

products must not be exported without obtaining the export license from the authorities concerned in

accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic

or mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO Semiconductor product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only; it is not

guaranteed for volume production. SANYO Semiconductor believes information herein is accurate

and reliable, but no guarantees are made or implied regarding its use or any infringements of

intellectual property rights or other rights of third parties.

PS

This catalog provides information as of July, 2006. Specifications and information herein are subject

to change without notice.