DATA SHEET

This Data Sheet states AMD’s current technical specifications regarding the Products described herein. This Data

Sheet may be revised by subsequent versions or modifications due to changes in technical specifications.

Publication# 21557

Rev: F Amendment: 4

Issue Date: May 5, 2006

Am29LV001B

1 Megabit (128 K x 8-Bit)

CMOS 3.0 Volt-only Boot Sector Flash Memory

DISTINCTIVE CHARACTERISTICS

■ Single power supply operation

— Full voltage range: 2.7 to 3.6 volt read and write

operations for battery-powered applications

— Regulated voltage range: 3.0 to 3.6 volt read and

write operations and for compatibility with high

performance 3.3 volt microprocessors

■ Manufactured on 0.32 µm process technology

■ High performance

— Full voltage range: access times as fast as 55 ns

— Regulated voltage range: access times as fast as

45 ns

■ Ultra low power consumption (typical values at 5

MHz)

— 200 nA Automatic Sleep mode current

— 200 nA standby mode current

— 7 mA read current

— 15 mA program/erase current

■ Flexible sector architecture

— One 8 Kbyte, two 4 Kbyte, and seven 16 Kbyte

— Supports full chip erase

— Sector Protection features:

Hardware method of locking a sector to prevent any

program or erase operations within that sector

Sectors can be locked in-system or via

programming equipment

Temporary Sector Unprotect feature allows code

changes in previously locked sectors

■ Unlock Bypass Mode Program Command

— Reduces overall programming time when issuing

multiple program command sequences

■ Top or bottom boot block configurations available

■ Embedded Algorithms

— Embedded Erase algorithm automatically

preprograms and erases the entire chip or any

combination of designated sectors

— Embedded Program algorithm automatically

writes and verifies data at specified addresses

■ Minimum 1 million erase cycle guarantee per sector

■ 20 Year data retention at 125°C

— Reliable operation for the life of the system

■ Package option

— 32-pin TSOP

— 32-pin PLCC

■ Compatibility with JEDEC standards

— Pinout and software compatible with single-

power supply Flash

— Superior inadvertent write protection

■ Data# Polling and toggle bits

— Provides a software method of detecting program

or erase operation completion

■ Erase Suspend/Erase Resume

— Supports reading data from or programming data

to a sector that is not being erased

■ Hardware reset pin (RESET#)

— Hardware method for resetting the device to

reading array data

This product has been retired and is not recommended for designs. Please contact your Spansion representative for alternates. Availability of this document is retained for reference and

historical purposes only.