Electronic Components Datasheet Search |
|
MB89567HCPFM Datasheet(PDF) 3 Page - Fujitsu Component Limited. |
|
MB89567HCPFM Datasheet(HTML) 3 Page - Fujitsu Component Limited. |
3 / 52 page 3 MB89560H Series * :Varies with conditions such as the operating frequency. (See “s Electrical Characteristics.”) *1 : When booster is used, the bias is reduced by 1/3. it can be selected by mask option. *2 : When the A/D converter is used, operating voltage must be 3.5V to 5.5V. *3 : Use MBM27C512-20 as the external ROM (operating voltage: 4.5 V to 5.5 V) *4 : I2C is complied to Intel Corp. System Management Bus Rev. 1.0 specification and to the Philips I2C specification. *5 : 1 tinst = one instruction cycle (execution time) which can be selected as 1/4, 1/8, 1/16, or 1/64 of main clock if main clock mode is selected , or 1/2 of the subclock if subclock mode is selected PWC timer 8-bit timer operation (count clock cycle: 1, 4, 32 tinst) 8-bit reload timer operation (toggle output possible, operating clock cycle: 1 - 32 tinst) 8-bit pulse width measurement (continuous measurement possible: High and Low widths, H to H, L to L, period & H at same time and High & rising to rising) 10-bit A/D con- verter*2 10-bit resolution × 8 channels A/D conversion function (conversion time: 60 tinst) Continuous activation by an 8/16-bit timer/counter output or a timebase timer output capable. 6 bit PPG Internal 6-bit counter Pulse width and cycle are program selectable 12 bit PPG Internal 12-bit counter Pulse width and cycle are program selectable I2C interface*4 Not Available 1 channel Use a 2-wire protocol to communicate with other device High speed UART Transfer data length: 4, 6, 7, 8 bits Transfer rate (300 to 192000 bps /10 MHz main clock) support sub-clock mode UART/SIO Transfer data length: 7, 8 bits for UART, 8 bits for SIO Transfer rate (1201 to 78125 bps / 10 MHz main clock) support sub-clock mode 8-bit serial I/O 8 bits, LSB first/MSB first selectability One clock selectable from four transfer clocks (one external shift clock, three internal shift clocks: 2, 8, 32 tinst) LCD Common output: 4 (max.) Segment output: 24 (max.) LCD driving power (bias) pins: 4 LCD display RAM size: 12 bytes (24 × 4 bits, max. 96 pixels) Duty LCD mode and Static LCD mode Booster for LCD driving: option Dividing resister for LCD driving: Built-in*1 Wild register Maximum of 6-byte data can be assigned in 6 different address. Used to replace any data in the ROM when specific address and data are assigned in Wild register. Wild register can be set up by using different communication methods through the device. External interrupt 1 (wake-up function) 8 independent channels (interrupt vector, request flag, request output enable) Edge selectability (rising/falling) Used also for wake-up from stop/sleep mode. (edge detection is also permitted in stop mode.) External interrupt 2 (wake-up function) 4 channels (“L” level interrupts, independent input enable). Used also for wake-up from stop/sleep mode. (Low-level detection is also permitted in stop mode.) Standby mode Sleep mode, stop mode and clock mode Process CMOS Operating voltage* 3.5 V to 5.5 V 3.5 V to 5.5 V 2.7 to 5.5 V 2.7 to 5.5 V*3 MB89567H MB89567HC MB89P568 MB89PV560 Part number Parameter |
Similar Part No. - MB89567HCPFM |
|
Similar Description - MB89567HCPFM |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |