SO-720 SAW Clock Oscillator

Vectron International, 267 Lowell Rd, Hudson NH 03051-4916

Tel: 1-88-VECTRON-1

Website: www.vectron.com

Page 6 of 7

Rev: 21 Jun 2006

The device is designed to meet the JEDEC standard

for Pb-Free assembly. The temperatures and time

intervals listed are based on the Pb-Free small body

requirements. The SO-720 device is hermetically

sealed so an aqueous wash is not an issue.

Termination Plating: Electroless Gold Plate over

Nickel Plate

25

217

200

150

260

Time (sec)

Reliability

VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and

IR reflow simulation. The SO-720 family is capable of meeting the following qualification tests:

Environmental Compliance

Parameter

Conditions

Mechanical Shock

MIL-STD-883, Method 2002

Mechanical Vibration

MIL-STD-883, Method 2007

Solderability

MIL-STD-883, Method 2003

Gross and Fine Leak

MIL-STD-883, Method 1014

Resistance to Solvents

MIL-STD-883, Method 2016

Handling Precautions

Although ESD protection circuitry has been designed into the SO-720 proper precautions should be taken when

handling and mounting. VI employs a Human Body model (HBM) and a Man-Man model (MM) for ESD

susceptibility testing and design protection evaluation.

ESD Ratings

Model

Minimum

Conditions

Human Body Model

1500 V

MIL-STD 883, Method 3015

Man Man Model

200 V

V/JESD22-A115-A,

Reflow Profile (IPC/JEDEC J-STD-020)

Parameter

Symbol

Value

PreHeat Time

60 sec Min, 180 sec Max

Ramp Up

3

Time Above 217

60 sec Min, 150 sec Max

Time To Peak Temperature

480 sec Max

Time At 260

20 sec Min, 40 sec Max

Ramp Down

6