Document Number: 42031

Revision 17-Nov-03

www.vishay.com

94

Type 735P

Vishay Sprague

For technical questions, contact spresale@vishay.com

FEATURES

• Wire or lug terminals

• High stability

• High ripple to 30 amperes

• Low inductance

• Low ESR

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55°C to + 105°C.

Capacitance Range: 1.0µF to 30.0µF.

Capacitance Tolerance: ± 10%, ± 5%.

DC Voltage Rating: 100 WVDC to 400 WVDC.

Equivalent Series Resistance: 20kHz to 100kHz.

Dissipation Factor: 0.1% maximum.

Measure at 1000Hz @ + 25°C.

Voltage Test: 200% of rated voltage for 2 minutes.

Insulation Resistance: Measure at 100 WVDC after a

2 minute charge.

At + 25°C: 200,000 Megohm - Microfarads, or 400,000

Megohm minimum.

Vibration Test (Condition B): No mechanical damage,

short, open or intermittent circuits.

DC Life Test: 140% of rated voltage for 1000 hours

@ + 105°C. No visible damage. No open or short circuits.

Maximum ∆ CAP ± 1.0%.

Minimum IR = 50% of initial limit.

Maximum DF = 0.10%.

Humidity Test: 95% relative humidity @ + 40°C for 250

hours. No visible damage.

Maximum ∆ CAP ± 1.0%.

Maximum IR = 20% of initial limit.

Maximum DF = 0.12%.

PHYSICAL CHARACTERISTICS

Pull Test:

Wire Leads - 5 pounds (2.3 kilograms) for one minute.

No physical damage.

Terminal Lugs - 10 pounds (4.5 kilograms) for one minute.

No physical damage.

Lead Bend: After three complete consecutive bends,

no damage.

capacitance and voltage.

DIMENSIONS in inches [millimeters]

* Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.78mm] from edge (Terminal Style L only).

Terminal Style L

D

Max.

D

Max.

0.032

[0.81

0.312 [7.9] Min.

0.360

[9.14

L

Tinned Solid Copper Lug

L

Tinned Solid Copper Wire*

Terminal Style H

D Max. < 0.700 [17.78], No. 20 AWG wire 0.032 [0.812] nominal diameter.

D Max.

0.156

[3.96

1.750

[44.45]

Min.

1.750

[44.45]

Min.

Film Capacitors

High Current, Wrap-and-Fill,

Metalized Polypropylene