Electronic Components Datasheet Search
Selected language     English  ▼
Part Name
         Description


ADCMP341 Datasheet(PDF) 1 Page - Analog Devices

Part No. ADCMP341
Description  Dual Comparators with 400mV Reference and programmable Hysteresis
Download  13 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  AD [Analog Devices]
Homepage  http://www.analog.com
Logo 

 
 1 page
background image
Dual Comparators with 400mV Reference
and programmable Hysteresis
Preliminary Technical Data
ADCMP341/ADCMP343
Rev. PrD
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringements of patents or other
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.
FEATURES
Low Quiescent Current: 6.5
µA Typ
Supply Range: 1.7V to 5.5V
400mV Reference ±0.8% Accuracy Over Temperature
Input Range Includes Ground
User programmable Hysteresis via resistor string
Low Input Bias Current: ±10nA Max
Open drain outputs with 40mA Typical Sink Current
Supports Wired-AND Connections
Input Polarities:
ADCMP341 noninverting
ADCMP343 inverting
Small SOT-23 Package
APPLICATIONS
Battery-Powered System Monitoring
Threshold Detectors
Relay Driving
Optoisolator Driving
Handheld Instruments
GENERAL DESCRIPTION
The ADCMP341/ADCMP343 combine two low power, low
voltage comparators with a 400mV reference in the 5-lead
SOT-23 package. Operating within a supply range of 1.7V to
5.5V, the devices only draw 6.5µA typical, making them ideal
for low voltage system monitoring and portable applications.
Hysteresis is determined using three resistors in a string
configuration with the upper and lower tap points connected to
the INA_U and INA_L pins of each comparator respectively.
The state of the comparators output internally selects which pin
is connected to the comparator inputs. So a change of state in
the comparator output will result in one of the inputs being
switched in to the comparator and the other being switched
out. This will provide the user with a fully flexible and simple
method of setting the hysteresis. Although there are two pins
available on each comparator, there is only actually one input
available externally at any one time, the other inputs are
connected internally to the reference.
The comparator outputs are open drain with the output stage
sinking capability guaranteed greater than 5mA over
temperature. The ADCMP341 have noninverting inputs and
the ADCMP343 have inverting inputs. Available in
commercial, industrial and automotive temperature ranges.
FUNCTIONAL BLOCK DIAGRAM
GND
VS
OUTA
400mV
OUTB
VINA
INA_U
INA_L
VINB
INB_U
INB_L
ADCMP341
GND
VS
OUTA
400mV
OUTB
VINA
INA_U
INA_L
VINB
INB_U
INB_L
ADCMP343
Figure 1




Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13 


Datasheet Download



Related Electronics Part Number

Part NumberComponents DescriptionHtml ViewManufacturer
FXL2TD245Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels 3-STATE Outputs and Independent 1 2 3 4 5 MoreFairchild Semiconductor
SI7842DPDual N-Channel 30-V D-S MOSFET with Schottky Diode 1 2 3 4 5 Vishay Siliconix
NX25F011B1M-BIT 2M-BIT AND 4M-BIT SERIAL FLASH MEMORIES WITH 4-PIN SPI INTERFACE 1 2 3 4 5 MoreList of Unclassifed Manufacturers
M306V5ME-XXXSPSINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER 1 2 3 4 5 MoreMitsubishi Electric Semiconductor
ADN2804622 Mbps Clock and Data Recovery IC with Integrated Limiting Amplifier 1 2 3 4 5 MoreAnalog Devices
IDT821034QUAD PCM CODEC WITH PROGRAMMABLE GAIN 1 2 3 4 5 MoreIntegrated Device Technology
54F191Up/Down Binary Counter with Preset and Ripple Clock 1 2 3 4 5 MoreNational Semiconductor (TI)
SN74SSTU32864C25-BIT CONFIGURABLE REGISTERED BUFFER WITH SSTL 18 INPUTS AND OUTPUTS 1 2 3 4 5 MoreTexas Instruments
ATR08414-channel Laser Driver with 2 Outputs 3 LVDS Inputs and Internal Termination 1 2 3 4 5 MoreATMEL Corporation
TC7MA157FKLow Voltage Quad 2-Channel Multiplexer with 3.6 V Tolerant Inputs and Outputs 1 2 3 4 5 MoreToshiba Semiconductor

Link URL

Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Bookmark   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com 2003 - 2017    


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl