Electronic Components Datasheet Search |
|
AGN200A12 Datasheet(PDF) 1 Page - Nais(Matsushita Electric Works) |
|
AGN200A12 Datasheet(HTML) 1 Page - Nais(Matsushita Electric Works) |
1 / 4 page GN 125 GN-RELAYS ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY 5.70 ±0.3 .224 ±.012 10.60 ±0.3 .417 ±.012 9.00 ±0.3 .354 ±.012 5.70 ±0.3 .224 ±.012 10.60 ±0.3 .417 ±.012 Max.10.00 .394 mm inch FEATURES • Compact slim body saves space Thanks to the small surface area of 5.7 mm × 10.6 mm .224 inch × .417 inch and low height of 9.0 mm .354 inch, the pack- aging density can be increased to allow for much smaller designs. • Outstanding surge resistance. Surge withstand between open contacts: 1,500 V 10 ×160 µs (FCC part 68) Surge withstand between contacts and coil: 2,500 V 2 ×10 µs (Bellcore) • The use of twin crossbar contacts en- sures high contact reliability. AgPd contact is used because of its good sulfide resistance. Adopting low-gas molding material. Coil assembly molding technology which avoids generating vola- tile gas from coil. • Increased packaging density Due to highly efficient magnetic circuit de- sign, leakage flux is reduced and changes in electrical characteristics from compo- nents being mounted close-together are minimized. This all means a packaging density higher than ever before. • Nominal operating power: 140 mW • Outstanding vibration and shock re- sistance. Functional shock resistance: 750 m/s2 {75G} Destructive shock resistance: 1,000 m/s2 {100G} Functional vibration resistance: 10 to 55 Hz (at double amplitude of 3.3 mm .130 inch) Destructive vibration resistance: 10 to 55 Hz (at double amplitude of 5 mm .197 inch) SPECIFICATIONS Contact Remarks: * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 Detection current: 10mA. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs. *8 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) Characteristics Notes: f1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. f2 The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70 °C –40° to +158°F. Arrangement 2 Form C Initial contact resistance, max. (By voltage drop 6 V DC 1A ) 100 m Ω Contact material Stationary: AgPd+Au clad Movable: AgPd Rating Nominal switching capacity (resistive load) 1 A 30 V DC 0.3 A 125 V AC Max. switching power (resistive load) 30 W, 37.5 V A Max. switching voltage 110 V DC, 125 V AC Max. switching current 1 A Min. switching capacity f1 10 µA 10 mV DC Nominal operating power Single side stable 140mW (1.5 to 12 V DC) 230mW (24 V DC) 1 coil latching 100mW (1.5 to 12 V DC) 120mW (24 V DC) Expected life (min. operations) Mechanical (at 180 cpm) 5 × 107 Electrical (at 20 cpm) 1 A 30 V DC resistive 105 0.3 A 125 V AC resistive 105 Initial insulation resistance*1 Min. 1,000M Ω (at 500V DC) Initial breakdown voltage*2 Between open contacts 750 Vrms for 1min. Between contact sets 1,000 Vrms for 1min. Between contacts and coil 1,500 Vrms for 1min. Initial surge voltage Between open contacts (10 ×160 µs) 1,500 V (FCC Part 68) Between contacts and coil (2 ×10 µs) 2,500 V (Bellcore) Operate time [Set time]*3 (at 20 °C) Max. 4 ms (Approx. 2 ms) [Max. 4 ms (Approx. 2 ms)] Release time (without diode) [Reset time]*3 (at 20 °C) Max. 4 ms (Approx. 1 ms) [Max. 4 ms (Approx. 2 ms)] Temperature rise*4 (at 20 °C) Max. 50 °C Shock resistance Functional*5 Min. 750 m/s2{75G] Destructive*6 Min. 1,000 m/s2{100G] Vibration resistance Functional*7 10 to 55 Hz at double amplitude of 3.3 mm Destructive 10 to 55 Hz at double amplitude of 5 mm Conditions for opera- tion, transport and storage*8 (Not freezing and con- densing at low tem- perature) Ambient temperature f2 –40 °C to 85°C –40 °F to 185°F Humidity 5 to 85% R.H. Unit weight Approx. 1 g.035 oz TESTING |
Similar Part No. - AGN200A12 |
|
Similar Description - AGN200A12 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |