ADA4861-3

Rev. A | Page 5 of 16

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

Rating

quiescent power dissipation and the power dissipated in the die

due to the amplifiers’ drive at the output. The quiescent power

Supply Voltage

12.6 V

Power Dissipation

See Figure 3

Common-Mode Input Voltage

Differential Input Voltage

Storage Temperature

−65°C to +125°C

()

L

OUT

L

OUT

S

S

S

D

R

V

R

V

V

I

V

P

2

–

2

⎟

⎠

⎞

⎜

⎝

⎛

×

+

×

=

Operating Temperature Range

−40°C to +105°C

Lead Temperature

JEDEC J-STD-20

Junction Temperature

150°C

RMS output voltages should be considered.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

In addition, more metal directly in contact with the package

Figure 3 shows the maximum safe power dissipation in the

package vs. the ambient temperature for the 14-lead SOIC_N

approximations.

THERMAL RESISTANCE

specified for device soldered in circuit board for surface-mount

packages.

2.5

0

AMBIENT TEMPERATURE (

°C)

–55

125

–45 –35 –25 –15 –5

5

152535455565758595 105 115

2.0

1.5

1.0

0.5

Table 4. Thermal Resistance

Package Type

Unit

14-lead SOIC_N

90

°C/W

Maximum Power Dissipation

The maximum safe power dissipation for the ADA4861-3 is

the die. At approximately 150°C, which is the glass transition

temperature, the plastic changes its properties. Even temporarily

exceeding this temperature limit can change the stresses that the

package exerts on the die, permanently shifting the parametric

performance of the amplifiers. Exceeding a junction temperature of

150°C for an extended period can result in changes in silicon

devices, potentially causing degradation or loss of functionality.

Figure 3. Maximum Power Dissipation vs. Temperature for a 4-Layer Board

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.