Electronic Components Datasheet Search |
|
HE1AN-S-DC110V Datasheet(PDF) 5 Page - Nais(Matsushita Electric Works) |
|
HE1AN-S-DC110V Datasheet(HTML) 5 Page - Nais(Matsushita Electric Works) |
5 / 6 page HE 114 2 Form A Type 1. Maximum switching power 2. Life curve 3. Contact temperature rise (DC type) Measured portion: Inside the coil Contact current: 30 A 100 50 30 20 10 5 1 0.5 30 100 500 1,000 Contact voltage, V AC resistive DC resistive 10 5 100 50 1,000 500 30 35 20 25 10 15 5 0 Contact current, A 250 V AC resistive 30 V DC resistive 70 60 50 40 30 20 10 0 100 110 120 20 °C 60 °C 40 °C Coil applied voltage, %V 4. Ambient temperature characteristics Sample: HE2aN-AC120V, 6 pcs. 40 60 80 20 –10 0 –20 –50 –20 –30 x- x- Ambient temperature, °C Pick-up voltage Drop-out voltage 20 10 MOUNTING METHOD 1. Plug-in terminal type 2. Screw terminal type 3. Allowable installation wiring size for screw terminal types and terminal blocks Due to the UP terminals, it is possible to either directly connect the wires or use crimped terminal M 4 screw Faston No.250 Washer M 4 screw Washer 1a type 2.6 mm or 5.5 mm2 2a type 2.0 mm or 3.5 mm2 NOTES 1. The dust cover should not be removed since doing so may alter the characteris- tics. 2. Avoid use under severe environmental conditions, such as high humidity, organic gas or in dust, oily locations and locations subjected to extremely frequent shock or vibrations. 3. When mounting, use spring washers. Optimum fastening torque ranges from 5 kg to 7 kg·cm 4.5 to 6 pounds·inch. 4. Firmly insert the receptacles so that there is no slack or looseness. To remove a receptacle, 2 to 4 kg of pulling strength is required. Do not remove more than one receptacle at one time.Always remove one receptacle at a time and pull it straight outwards. 5. Install the relay so that it lies in direction A (up-down direction). (Pick-up voltage and drop-out voltage values are those when installed in direction A.) 6. When using the AC type, the operate time due to the in-rush phase is 20 ms or more. Therefore, it is necessary for you to verify the characteristics for your actual circuit. Moreover, the release time for the NC side of the 2a1b type requires the same verification. 7. When using the push-on blocks for the screw terminal type, use crimped termi- nals and tighten the screw-down termi- nals to the torque’s listed below. 8. All AC240V types are rated for double coil voltage, both AC 220V AC 240V. M4.5 screw 147 N-cm to 166.6 N-cm (15 to 17 kg·cm) M4 screw 117.6 N-cm to 137 N-cm (12 to 14 kg·cm) M3.5 screw 78.4 N-m to 98 N-cm (8 to 10 kg·cm) For Cautions for Use, see Relay Technical Information (Page 11 to 39). |
Similar Part No. - HE1AN-S-DC110V |
|
Similar Description - HE1AN-S-DC110V |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |