2 / 7 page
2000 Aug 08
2
BCcomponents
Product specification
Metal film resistors
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high grade BALOX ceramic body. After a helical groove has been cut
in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated
with a blue lacquer which provides electrical, mechanical, and climatic protection. The encapsulation is resistant to all
cleaning solvents in accordance with “MIL-STD-202E, method 215”, and “IEC 60068-2-45”.
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Resistance range
0.22
Ω to 10 MΩ; see Table 1
Resistance tolerance and series
±5%, (E24); ±1%, (E24/E96)
Temperature coefficient
±100 × 10−6/K
Operation mode
normal
long term
Climatic category (LCT/UCT/days)
55/155/56
55/125/56
Max. dissipation, P70
0.40 W
0.25 W
Thermal resistance, Rth
200
°C/W
Max. continuous operating voltage, Umax
200 V (DC or RMS)
Noise R
≤ 1MΩ
max. 0.1 V/V
Surface temperature
155
°C
125
°C
Operating temperature range
−55 °C to +155 °C
−55 °C to +125 °C
Max. resistance change at P70 for resistance range,
∆R/R max., after:
1000 h
0.50%
0.25%
8000 h
1.0%
0.50%
225000 h
−1.5%
Permissible voltage against ambient:
1 minute
300 V
continuous
75 V
Stability (
∆R/R max.) after:
load (1000 hours)
±0.50% + 0.05 Ω±0.25% + 0.05 Ω
climatic test
±1.0% + 0.05 Ω
resistance to soldering heat
±0.25% + 0.05 Ω
short time overload (400 V max.)
±0.25% + 0.05 Ω