Anachip Corp.

www.anachip.com.tw

Rev. 1.0 Dec 16, 2004

8/10

A.C. Electrical Characteristics

Switching Waveforms

Inputs, I/O,

Registered Feedback,

Synchronous Preset

Clock

Notes:

Asynchronous

Reset

Registered

Outputs

Combinatorial

Outputs

1. Minimum DC input is -0.5V, however, inputs may undershoot to -2.0V for peri-

ods less than 20 ns.

3. The Supply Voltage range of 2.7 to 3.6V was chosen to allow this part to be

used in both 3V ±10% and 3.3V ±10% applications.

levels.

6. “Input” refers to an input pin signal.

8. Capacitances are tested on a sample basis.

9. Test conditions assume: signal transition times of 3ns or less from the 10% and

90% points, timing reference levels of 1.5V (Unless otherwise specified).

10. Test one output at a time for a duration of less than 1 second.

grammed as a 10-bit Counter.

12. Parameters are not 100% tested. Specifications are based on initial character-

ization and are tested after any design process modification that might affect oper-

ational frequency.

transaction from sleep mode.

14. Input at GND.