Electronic Components Datasheet Search |
|
MAX1363EUB Datasheet(PDF) 1 Page - Maxim Integrated Products |
|
MAX1363EUB Datasheet(HTML) 1 Page - Maxim Integrated Products |
1 / 24 page General Description The MAX1363/MAX1364 low-power, 12-bit, 4-channel analog-to-digital converters (ADCs) feature a digitally programmable window comparator with an interrupt out- put for automatic system-monitoring applications. Once configured, monitor mode automatically asserts an inter- rupt when any analog input exceeds the programmed upper or lower thresholds, without interaction to the host. The MAX1363/MAX1364 respond to the SMBus™ alert, allowing quick identification of the alarming device on a shared interrupt. A programmable delay between monitoring intervals lowers power consumption for reduced monitoring rates. In addition, the MAX1363/MAX1364 integrate an inter- nal voltage reference, a clock, and a 1.7MHz, high- speed, I2C™-compatible, 2-wire serial interface. The optimized interface allows a maximum conversion rate of 94.4ksps in normal mode while reading back the conversion results. Each of the four analog inputs is configurable for single-ended or fully differential opera- tion and unipolar or bipolar operation. Two scan modes utilize on-chip random access memory (RAM) to allow eight conversions of a selected channel or scanning of a group of channels to reduce interface overhead. These devices operate from a single 2.7V to 3.6V (MAX1363) or 4.5V to 5.5V (MAX1364) supply and require only 436µA at the maximum sampling rate of 133ksps in monitor mode and 670µA at the maximum sampling rate of 94.4ksps. AutoShutdown™ powers down the devices between conversions, reducing sup- ply current to less than 1µA when idle. The full-scale analog-input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX1363 features a 2.048V internal reference, and the MAX1364 features a 4.096V internal reference. The MAX1363/MAX1364 are available in a 10-pin µMAX® package and are specified over the extended (-40°C to +85°C) temperature range. For 10-bit applica- tions, refer to the pin-compatible MAX1361/MAX1362 data sheet. Applications System Monitoring/Supervision Servers/Workstations High-Reliability Power Supplies Medical Instrumentation Features ♦ Monitor Mode Programmable Lower/Upper Trip Threshold Alarm-Status Register Records Fault Events SMBus Alert Response Programmable Sampling Intervals ♦ 12-Bit, I2C-Compatible ADC ±1 LSB INL, ±1 LSB DNL ♦ 4-Channel Single-Ended or 2-Channel Fully Differential Inputs ♦ Software-Programmable Bipolar/Unipolar Conversions ♦ Fast Sampling Rate 94.4ksps While Continuously Reading Conversions 133ksps in Monitor Mode ♦ High-Speed, I2C-Compatible Serial Interface 100kHz/400kHz Standard/Fast Mode Up to 1.7MHz High-Speed Mode Six Available I2C Slave Addresses ♦ Single Supply 2.7V to 3.6V (MAX1363) 4.5V to 5.5V (MAX1364) ♦ Internal Reference 2.048V (MAX1363) 4.096V (MAX1364) ♦ External Reference: 1V to VDD ♦ Low Power 436µA in Monitor Mode (133ksps) 670µA at 94.4ksps 6µA at 1ksps 0.5µA in Power-Down Mode ♦ Small Package 10-Pin µMAX 4-Channel, 12-Bit System Monitors with Programmable Trip Window and SMBus Alert Response ________________________________________________________________ Maxim Integrated Products 1 Ordering Information/Selector Guide 19-3338; Rev 1; 3/05 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. PART TEMP RANGE PIN-PACKAGE I 2C SLAVE ADDRESS SUPPLY VOLTAGE (V) MAX1363EUB -40°C to +85°C 10 µMAX 0110100/0110101 2.7 to 3.6 MAX1363LEUB* -40°C to +85°C 10 µMAX 0110010/0110011 2.7 to 3.6 MAX1363MEUB -40°C to +85°C 10 µMAX 0110110/0110111 2.7 to 3.6 SMBus is a trademark of Intel Corporation. I 2C is a trademark of Philips Corporation. Purchase of I2C compo- nents from Maxim Integrated Products, Inc. or one of its subli- censed Associated Companies, conveys a license under the Philips I 2C Patent Rights to use these components in an I2C sys- tem, provided that the system conforms to the I 2C Standard Specification as defined by Philips. AutoShutdown is a trademark of Maxim Integrated Products, Inc. µMAX is a registered trademark of Maxim Integrated Products, Inc. Typical Operating Circuit and Pin Configuration appear at end of data sheet. Ordering Information/Selector Guide continued at end of data sheet. *Future product—contact factory for availability. |
Similar Part No. - MAX1363EUB |
|
Similar Description - MAX1363EUB |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |