10

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

The input RC cancels a zero produced by the output op-amp

feedback connection at = 1/RC. With the input RC connected

This variable integrator may be used in networks such as the

Bi-quad. In some applications the input RC may be omitted.

can be exchanged.

A voltage-controlled equalizer and cable driver can be

constructed so:

The main signal path is via the REF pin. This ensures

maximum signal linearity, while the multiplier input is used to

depending on cable high-frequency losses, at maximum

gain, including backmatch resistor loss.

EQUALIZATION AND LINE DRIVER AMPLIFIER

EL4451