6 / 11 page
P6/11
Preliminary, June 2005
ML6102
Functional Description (Refers to CMOS Output)
Notes :
1. Output cannot be specified for power supply voltage under VMIN (ie. 0.8V) because operation is not
guaranteed for that range.
2. VDF : Detect Voltage for drop in power supply voltage
3. VDR : Detect Release Voltage for rise in power supply voltage
4. VHYS = VDR – VDF
5. tOL : Time lag between the time that the power supply voltage rises to the detect release voltage (VDR)
and the time that the output pin (OUT) goes to “L” level.
6. tOH : Time lag between the time that the power supply voltage falls to the detect voltage (VDF) and the
time that the output pin (OUT) goes to “H” level.
7. These characteristics for the N-channel open drain output are when a load resistor is connected
between the OUT and IN pins.
Input Voltage (V )
Detect Voltage (V
)
Detect Release Voltage (V
)
IN
Minimum Operating Voltage (V
)
Ground Voltage (V )
DF
DR
MIN
SS
Ground Voltage (V )
SS
Output Voltage (V
)
OUT
t
OL
t
OH
t
OL
t
OH