1

Aug. 2003

Edition 0.2

Pre

lim

ina

ry.

ASSP

Dual Serial Input

MB15F76UV

DESCRIPTION

The Fujitsu MB15F76UV is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 6000MHz and a

1500MHz prescalers. Both IF and RF PLL section have a 1/4 divider. And a 16/17 or a 32/33 for the 6000MHz

prescaler, and a 4/5 or a 8/9 for the 1500MHz prescaler can be selected for the prescaler that enables pulse swallow

operation.

The BiCMOS process is used, as a result, a supply current is typically 8.5mA typ. at 3.0V. The supply voltage range

is from 2.5V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable

by serial data. Fast locking is acheived for adopting the new circuit.

The new package(BCC18) decreases a mount area of MB15F76UV about 50% comparing with the former BCC20(for

dual PLL).

MB15F76UV is ideally suited for wireless communications, such as W-LAN.

FEATURES

• Very small package: BCC18 (2.4*2.7*0.45mm)

• High frequency operation: RF synthesizer : 6000MHz max

IF synthesizer : 1500MHz max

°C, SW=0 in RF, IF locking state)

• Direct power saving function : Power supply current in power saving mode

Typ. 0.1

µA(Vcc=3.0V, Ta=25°C), Max. 10 µA(Vcc=3.0V)

• Dual modulus prescaler : 6000MHz prescaler(16/17 or 32/33, and 1/4divider)

•

1500MHz prescaler(4/5 or 8/9, and 1/4divider)

• Serial input 14-bit programmable reference divider: R = 3 to 16,383

• Serial input programmable divider consisting of:

- Binary 5-bit swallow counter: 0 to 31

- Binary 13-bit programmable counter: 3 to 8191

• On-chip phase comparator for fast lock and low noise

• On-chip phase control for phase comparator

• Operating temperature: Ta = –40 to 85

°C

• Sireal data format compatible with MB15F76UL

18-pad, Plastic BCC

(LCC-18P-M05)